Step 1: Take the guide and slip it down the slot until you feel it lock into place. Begin polishing your nails by holding the Flawless Fingers cap in your right hand. You will hold it as you would a pencil. Your index finger will slip down the guide. You will put pressure on the guide. The amount will vary depending on the width of your nail. This will bring the brush and guide close together. Set the guide in the crease between your nail and skin closest to the top (by your hand) of your nail. The guide will help steady the stroke. As you are moving the polish down your nail the guide will pick up the excess polish.

When polishing the center of your nail release the amount of pressure on the guide keeping the guide in the crease to steady the application. Be sure to overlap with the brush to prevent brush strokes or uneven polish.

Step 2: For the left side you are going to hold the applicator the same way but this time allow your thumb to slip down and add pressure. The same principals apply as mentioned above.

Step 3: For your other hand, simply do the same thing. We recommend a few practice strokes before adding polish to understand how much pressure is right for your nails.

Step 4: When you are done polishing your nails, carefully grab the top of the guide and pull up. You can then dispose of the guide. If preferred you can wait until your nails are dry before removing the guide. The Flawless Fingers cap will screw onto your nail polish bottle for the next use.